You can adapt local and overall thickness of the orthosis using the FreeForma tool.
In the tickness step, use the plus and minus buttons in the panel on the right side of the screen to change the thickness.
- You can change the overall thickness of the orthosis by adapting the pink part.
- You can also adapt local thickness by adapting the blue part. To add a different thickness, you must paint the spot(s) that require(s) extra thickness on the model in blue.
Check out this article for a more in-depth guide on choosing the right thickness.
Decide on the printing technology and the combined print material you want to use.
- You can choose between different options by clicking on the little arrows next to 'Semi-Rigid (FDM-PP)'
- A selection menu will appear with the different possibilities.
